Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 20 results ...
Abdolrezaei, H, Siahkali, H and Olamaei, J (2021) Coordination of similar days and multi-objective posterior process to predict energy of transmission substation. Journal of Engineering, Design and Technology, 19(6), 1556-85.
Chellappa, V, Srivastava, V and Salve, U R (2021) A systematic review of construction workers' health and safety research in India. Journal of Engineering, Design and Technology, 19(6), 1488-504.
Eken, T Y, Sarioglu, C and Kucuk, I (2021) Corrosion behaviour of twin-roll cast 8006 aluminium alloy foil with different thicknesses for the food packaging industry. Journal of Engineering, Design and Technology, 19(6), 1421-32.
Evans, M, Farrell, P, Zewein, W and Mashali, A (2021) Analysis framework for the interactions between building information modelling (BIM) and lean construction on construction mega-projects. Journal of Engineering, Design and Technology, 19(6), 1451-71.
Faraji, A (2021) Neuro-fuzzy system based model for prediction of project performance in downstream sector of petroleum industry in Iran. Journal of Engineering, Design and Technology, 19(6), 1268-90.
Heidari, A, Imani, D M and Khalilzadeh, M (2021) A hub location model in the sustainable supply chain considering customer segmentation. Journal of Engineering, Design and Technology, 19(6), 1387-420.
Hongsheng, T, Changwen, H and Chenye, G (2021) Development of a rotatable similar simulation experimental system for steep coal seam mining. Journal of Engineering, Design and Technology, 19(6), 1373-86.
- Type: Journal Article
- Keywords: pavement; safety; simulation; experiment
- ISBN/ISSN:
- URL: 10.1108/JEDT-08-2020-0329
- Abstract:
Currently, the existing similar simulation is still limited in the following aspects: un-rotatable laboratory devices, the difficulty in the pavement on steep seams and great error of the experimental data. To address above-mentioned problems, this study combined theoretical analysis and numerical simulation and developed a rotatable experimental system for similar simulation on steep coal seam mining on the premise of ensuring experimental safety. The present experimental system mainly consists of the model support, the rotation system and the bearing system. By taking into account the experimental requirements and actual laboratory space, the sizes of the model support and the bearing system were determined. Considering the requirements in space limit and rotation stability, the rotation mode of vertical sliding on the left side and the horizontal sliding on the lower side was designed. Using programmable logic controller automatic angle control technology, the rotation angle, velocity and displacement of the model can be automatically adjusted and controlled so as to achieve safe rotation and precise control. Finally, the calculation method of the mass of the required similar materials for paving the coal strata at different inclination angles and in different horizons was analyzed, and the related mass proportion calculation software was developed.
Hulio, Z H, Yousufzai, G and Jiang, W (2021) Statistical analysis of wind resource and energy potential assessment of Quaidabad site, Sindh Pakistan. Journal of Engineering, Design and Technology, 19(6), 1291-316.
Mahmud, A T, Ogunlana, S O and Hong, W T (2021) Key driving factors of cost overrun in highway infrastructure projects in Nigeria: a context-based perspective. Journal of Engineering, Design and Technology, 19(6), 1530-55.
Malge, A M and Pawar, P M (2021) Wind tunnel and numerical study of multi-storey vertical axis wind turbines with different configurations. Journal of Engineering, Design and Technology, 19(6), 1358-72.
Mdibi, L, Van Zyl, R, Kosch, M and Ward, J (2021) A land-based HF transmitter for ionospheric propagation studies using SuperDARN radars. Journal of Engineering, Design and Technology, 19(6), 1648-59.
Ostakh, O, Uzyakova, E, Grechishcheva, N and Kusheeva, V (2021) Ecotoxicological assessment of soil-like mixtures made of drill cuttings. Journal of Engineering, Design and Technology, 19(6), 1433-50.
Othman, A A E and Alamoudy, F O (2021) Optimising building performance through integrating risk management and building information modelling during the design process. Journal of Engineering, Design and Technology, 19(6), 1233-67.
Pandian, A N and Palanivelu, A (2021) Metaheuristic optimization based placement of SVCs with multiple objectives. Journal of Engineering, Design and Technology, 19(6), 1586-600.
Perera, B A K S, Sirimewan, D C and Senadeera, A D (2021) Management of variations in the public-sector building construction projects in Sri Lanka. Journal of Engineering, Design and Technology, 19(6), 1601-19.
Roy, S, Majumder, S, Bhattacharya, S and Sardar, I H (2021) Simulation and analysis of the effects of room surface reflectance combinations on a proposed retrofit illumination system of an office. Journal of Engineering, Design and Technology, 19(6), 1620-47.
Sibanda, V, Mpofu, K and Trimble, J (2021) Methodology for the design of a reconfigurable guillotine shear and bending press machine (RGS&BPM). Journal of Engineering, Design and Technology, 19(6), 1317-43.
Somani, N, Singh, N and Gupta, N K (2021) Joining and characterization of SS-430 using microwave hybrid heating technique. Journal of Engineering, Design and Technology, 19(6), 1344-57.
van Tonder, P and Low, M S (2021) The effect of CO loading on the properties of normal concrete vs fly ash concrete. Journal of Engineering, Design and Technology, 19(6), 1472-87.
Yembi Renault, B, Agumba, J N and Ansary, N (2021) Regression analysis of the influence of demographic characteristics using risk management practices within South African small and medium construction enterprises. Journal of Engineering, Design and Technology, 19(6), 1505-29.