ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 245 results ...

Abdul Nabi, M and El-adaway, I H (2021) Risk-Based Approach to Predict the Cost Performance of Modularization in Construction Projects. Journal of Construction Engineering and Management, 147(10).

Abediniangerabi, B, Shahandashti, S M, Ahmadi, N and Ashuri, B (2017) Empirical Investigation of Temporal Association between Architecture Billings Index and Construction Spending Using Time-Series Methods. Journal of Construction Engineering and Management, 143(10).

AbouRizk, S (2010) Role of Simulation in Construction Engineering and Management. Journal of Construction Engineering and Management, 136(10), 1140–53.

AbouRizk, S, Halpin, D, Mohamed, Y and Hermann, U (2011) Research in Modeling and Simulation for Improving Construction Engineering Operations. Journal of Construction Engineering and Management, 137(10), 843–52.

Ahmed, M O, Khalef, R, Ali, G G and El-adaway, I H (2021) Evaluating Deterioration of Tunnels Using Computational Machine Learning Algorithms. Journal of Construction Engineering and Management, 147(10).

Ahmed, S and Arocho, I (2022) Implementing a Choosing-by-Advantages Decision-Making Method to Evaluate the Critical Success Factors of Mass-Timber Building Materials in the US. Journal of Construction Engineering and Management, 148(10).

Al Qady, M and Kandil, A (2013) Document Management in Construction: Practices and Opinions. Journal of Construction Engineering and Management, 139(10).

• Type: Journal Article
• Keywords: Documentation; Information management; Project management; Documentation; Information management; Project management; Information technologies;
• ISBN/ISSN: 0733-9364
• URL: https://doi.org/10.1061/(ASCE)CO.1943-7862.0000741
• Abstract:
  Previous surveys on document management (DM) have focused on certain aspects such as the adoption of electronic methods by construction firms and the important features of electronic document management systems. This study presents the results of a survey of practitioners on various aspects of DM, including document storage, classification, search, and transmittal. The survey aims to identify practices that are implemented in large firms in the industry and the opinions of practitioners regarding such practices. Statistical models were used to map the relations between DM practices, characteristics of firms, and opinions of practitioners. The results indicate elaborate interactions between the different components, in which traditional and advanced methods are used simultaneously. The metadata approach for organizing documents is dominant; however, the use of text content is also common, especially for document search and retrieval. The results are considered to be a snapshot to benchmark the development of practices and opinions over time. They serve researchers and developers by identifying deficiencies in current practices and highlighting important issues from the perspective of industry practitioners. They serve practitioners by offering a picture of how other top industry firms operate when managing construction project documents.

Alanjari, P, RazaviAlavi, S and AbouRizk, S (2015) Hybrid Genetic Algorithm-Simulation Optimization Method for Proactively Planning Layout of Material Yard Laydown. Journal of Construction Engineering and Management, 141(10).

Alarcón, L F, Ashley, D B, de Hanily, A S, Molenaar, K R and Ungo, R (2011) Risk Planning and Management for the Panama Canal Expansion Program. Journal of Construction Engineering and Management, 137(10), 762–71.

Algarni, A M, Arditi, D and Polat, G (2007) Build-Operate-Transfer in Infrastructure Projects in the United States. Journal of Construction Engineering and Management, 133(10), 728–35.

Ali, A, Wang, H, Soomro, M A and Islam, T (2020) Shared Leadership and Team Creativity: Construction Industry Perspective. Journal of Construction Engineering and Management, 146(10).

Ali, S, Zayed, T and Hegab, M (2007) Modeling the Effect of Subjective Factors on Productivity of Trenchless Technology Application to Buried Infrastructure Systems. Journal of Construction Engineering and Management, 133(10), 743–8.

Baker, M, Ali, M and French, E (2021) Leadership Diversity and Its Influence on Equality Initiatives and Performance: Insights for Construction Management. Journal of Construction Engineering and Management, 147(10).

Balasubramanian, V and Prasad, G S (2007) Manual Bar Bending—An Occupational Hazard for Construction Workers in Developing Nations. Journal of Construction Engineering and Management, 133(10), 791–7.

Ballesteros-Pérez, P, Skitmore, M, Sanz-Ablanedo, E and Verhoeven, P (2019) Forecasting the Number and Distribution of New Bidders for an Upcoming Construction Auction. Journal of Construction Engineering and Management, 145(10).

Barbachyn, S M, Devine, R D, Thrall, A P and Kurama, Y C (2017) Economic Evaluation of High-Strength Materials in Stocky Reinforced Concrete Shear Walls. Journal of Construction Engineering and Management, 143(10).

Bauer, E and Menches, C L (2011) Why We Need Renaissance Engineers: Golden Gate Bridge Seismic Retrofit Phase II Case Study. Journal of Construction Engineering and Management, 137(10), 901–5.

Bingham, E, Gibson, G E and El Asmar, M (2019) Identifying Team Selection and Alignment Factors by Delivery Method for Transportation Projects. Journal of Construction Engineering and Management, 145(10).

Bittner, R B and Schmitt, R L (2011) Construction Engineering Process and Knowledge Requirements for Fostering Creative Design Solutions on Infrastructure Projects. Journal of Construction Engineering and Management, 137(10), 772–6.

Cai, S, Ma, Z, Skibniewski, M J and Guo, J (2020) Construction Automation and Robotics: From One-Offs to Follow-Ups Based on Practices of Chinese Construction Companies. Journal of Construction Engineering and Management, 146(10).

Cariaga, I, El-Diraby, T and Osman, H (2007) Integrating Value Analysis and Quality Function Deployment for Evaluating Design Alternatives. Journal of Construction Engineering and Management, 133(10), 761–70.

Carpenter, N and Bausman, D C (2016) Project Delivery Method Performance for Public School Construction: Design-Bid-Build versus CM at Risk. Journal of Construction Engineering and Management, 142(10).

Castro-Lacouture, D, Süer, G A, Gonzalez-Joaqui, J and Yates, J K (2009) Construction Project Scheduling with Time, Cost, and Material Restrictions Using Fuzzy Mathematical Models and Critical Path Method. Journal of Construction Engineering and Management, 135(10), 1096–104.

Chan, A P C, Yang, Y and Darko, A (2018) Construction Accidents in a Large-Scale Public Infrastructure Project: Severity and Prevention. Journal of Construction Engineering and Management, 144(10).

Chan, I Y S, Leung, M and Yu, S S W (2012) Managing the Stress of Hong Kong Expatriate Construction Professionals in Mainland China: Focus Group Study Exploring Individual Coping Strategies and Organizational Support. Journal of Construction Engineering and Management, 138(10), 1150–60.

Chang, A S, Du, S and Shen, F (2012) Engineer Self-Evaluation Checklist for Effective Site Visits. Journal of Construction Engineering and Management, 138(10), 1220–9.

Chang, C and Chen, S (2016) Transitional Public–Private Partnership Model in China: Contracting with Little Recourse to Contracts. Journal of Construction Engineering and Management, 142(10).

Chassiakos, A P and Sakellaropoulos, S P (2005) Time-Cost Optimization of Construction Projects with Generalized Activity Constraints. Journal of Construction Engineering and Management, 131(10), 1115–24.

Chen, C, Wang, Q, Martek, I and Li, H (2016) International Market Selection Model for Large Chinese Contractors. Journal of Construction Engineering and Management, 142(10).

Chen, H, Zhu, Y and Luo, X (2022) TableGraph: An Image Segmentation–Based Table Knowledge Interpretation Model for Civil and Construction Inspection Documentation. Journal of Construction Engineering and Management, 148(10).

Chen, P, Qiang, M and Wang, J N (2009) Project Management in the Chinese Construction Industry: Six-Case Study. Journal of Construction Engineering and Management, 135(10), 1016–26.

Chih, Y, Kiazad, K, Cheng, D, Emamirad, E and Restubog, S L (2018) Interactive Effects of Supportive Leadership and Top Management Team’s Charismatic Vision in Predicting Worker Retention in the Philippines. Journal of Construction Engineering and Management, 144(10).

Chinowsky, P, Diekmann, J and Galotti, V (2008) Social Network Model of Construction. Journal of Construction Engineering and Management, 134(10), 804–12.

Choi, J O, O’Connor, J T and Kim, T W (2016) Recipes for Cost and Schedule Successes in Industrial Modular Projects: Qualitative Comparative Analysis. Journal of Construction Engineering and Management, 142(10).

Choi, K and Lee, H W (2016) Deconstructing the Construction Industry: A Spatiotemporal Clustering Approach to Profitability Modeling. Journal of Construction Engineering and Management, 142(10).

Chow, P T, Kong, F and Cheung, S O (2012) Mediating and Moderating Effect of Tension on Withdrawal-Commitment Relationship in Construction Dispute Negotiation. Journal of Construction Engineering and Management, 138(10), 1230–8.

Chowdhury, S, Zhu, J, Rasoulkhani, K, Mostafavi, A, Jaselskis, E, Stoa, R, Li, Q, Banerjee, S, Alsharef, A and Brannen, L (2020) Guidelines for Robust Adaptation to Environmental Regulations in Infrastructure Projects. Journal of Construction Engineering and Management, 146(10).

Cleveland, A B (2011) Emerging Tools to Enable Construction Engineering. Journal of Construction Engineering and Management, 137(10), 836–42.

Cleveland, T G and Fashokun, A (2006) Construction-Associated Solids Loads with a Temporary Sediment Control BMP. Journal of Construction Engineering and Management, 132(10), 1122–5.

Cruz Rios, F, Grau, D and Bilec, M (2021) Barriers and Enablers to Circular Building Design in the US: An Empirical Study. Journal of Construction Engineering and Management, 147(10).

D’Onofrio, R M (2017) CPM Scheduling: A 60-Year History. Journal of Construction Engineering and Management, 143(10).

da Rocha, C G and Kemmer, S L (2013) Method to Implement Delayed Product Differentiation in Construction of High-Rise Apartment Building Projects. Journal of Construction Engineering and Management, 139(10).

da Silva, T F L, de Carvalho, M M and Vieira, D R (2022) BIM Critical-Success Factors in the Design Phase and Risk Management: Exploring Knowledge and Maturity Mediating Effect. Journal of Construction Engineering and Management, 148(10).

de Athayde Prata, B, Pitombeira-Neto, A R and de Moraes Sales, C J (2015) An Integer Linear Programming Model for the Multiperiod Production Planning of Precast Concrete Beams. Journal of Construction Engineering and Management, 141(10).

de Castro e Silva Neto, D, Cruz, C O, Rodrigues, F and Silva, P (2016) Bibliometric Analysis of PPP and PFI Literature: Overview of 25 Years of Research. Journal of Construction Engineering and Management, 142(10).

de Oliveira, A L and Prudêncio, L R (2015) Evaluation of the Superficial Texture of Concrete Pavers Using Digital Image Processing. Journal of Construction Engineering and Management, 141(10).

Deng, F and Smyth, H (2013) Contingency-Based Approach to Firm Performance in Construction: Critical Review of Empirical Research. Journal of Construction Engineering and Management, 139(10).

Ding, Z, Ng, F, Wang, J and Zou, L (2012) Distinction between Team-Based Self-Esteem and Company-Based Self-Esteem in the Construction Industry. Journal of Construction Engineering and Management, 138(10), 1212–9.

Doğan, S Z, Arditi, D and Günaydın, H M (2006) Determining Attribute Weights in a CBR Model for Early Cost Prediction of Structural Systems. Journal of Construction Engineering and Management, 132(10), 1092–8.

Duzkale, A K and Lucko, G (2016) Exposing Uncertainty in Bid Preparation of Steel Construction Cost Estimating: I. Conceptual Framework and Qualitative C-I-V-I-L Classification. Journal of Construction Engineering and Management, 142(10).

Duzkale, A K and Lucko, G (2016) Exposing Uncertainty in Bid Preparation of Steel Construction Cost Estimating: II. Comparative Analysis and Quantitative C-I-V-I-L Classification. Journal of Construction Engineering and Management, 142(10).

Eke, G, Elgy, J and Wedawatta, G (2019) Establishing a Link between Contractor Selection Strategy and Project Outcomes: Simulation Study. Journal of Construction Engineering and Management, 145(10).

El Asmar, M, Hanna, A S and Chang, C (2009) Monte Carlo Simulation Approach to Support Alliance Team Selection. Journal of Construction Engineering and Management, 135(10), 1087–95.

El-adaway, I H, Ali, G, Assaad, R, Elsayegh, A and Abotaleb, I S (2019) Analytic Overview of Citation Metrics in the Civil Engineering Domain with Focus on Construction Engineering and Management Specialty Area and Its Subdisciplines. Journal of Construction Engineering and Management, 145(10).

Eldin, N N and Mayfield, J (2005) Determination of Most Economical Scrapers Fleet. Journal of Construction Engineering and Management, 131(10), 1109–14.

Fan, S, Shen, Q and Lin, G (2007) Comparative Study of Idea Generation between Traditional Value Management Workshops and GDSS-Supported Workshops. Journal of Construction Engineering and Management, 133(10), 816–25.

Fischer, M and Adams, H (2011) Engineering-Based Decisions in Construction. Journal of Construction Engineering and Management, 137(10), 751–4.

Fisher, A D and Robitaille, A M (2011) Replacement of the Movable Span of the Thames River Bridge: How 19th Century Technology Impacted 21st Century Construction. Journal of Construction Engineering and Management, 137(10), 895–900.

Gan, V J L (2022) BIM-Based Building Geometric Modeling and Automatic Generative Design for Sustainable Offsite Construction. Journal of Construction Engineering and Management, 148(10).

Gerber, B and Ekenel, M (2013) Building Code Requirements for Inspection of Adhesive Anchors in Concrete. Journal of Construction Engineering and Management, 139(10).

Gharouni Jafari, K and Noorzai, E (2021) Selecting the Most Appropriate Project Manager to Improve the Performance of the Occupational Groups in Road Construction Projects in Warm Regions. Journal of Construction Engineering and Management, 147(10).

González, V, Alarcón, L F, Maturana, S, Mundaca, F and Bustamante, J (2010) Improving Planning Reliability and Project Performance Using the Reliable Commitment Model. Journal of Construction Engineering and Management, 136(10), 1129–39.

Grau, D, Cruz Rios, F and Sherman, R (2021) Project Validation: A Set-Based and Concurrent Design Approach to Inform Owner’s Authorization Decision on Complex Projects. Journal of Construction Engineering and Management, 147(10).

Gurmu, A T and Aibinu, A A (2017) Construction Equipment Management Practices for Improving Labor Productivity in Multistory Building Construction Projects. Journal of Construction Engineering and Management, 143(10).

Gwak, H, Son, S, Park, Y and Lee, D (2016) Exact Time–Cost Tradeoff Analysis in Concurrency-Based Scheduling. Journal of Construction Engineering and Management, 142(10).

Hallowell, M R and Gambatese, J A (2009) Activity-Based Safety Risk Quantification for Concrete Formwork Construction. Journal of Construction Engineering and Management, 135(10), 990–8.

Hallowell, M R, Hinze, J W, Baud, K C and Wehle, A (2013) Proactive Construction Safety Control: Measuring, Monitoring, and Responding to Safety Leading Indicators. Journal of Construction Engineering and Management, 139(10).

Hanna, A S and Iskandar, K A (2017) Quantifying and Modeling the Cumulative Impact of Change Orders. Journal of Construction Engineering and Management, 143(10).

Hanna, A, Boodai, F and El Asmar, M (2013) State of Practice of Building Information Modeling in Mechanical and Electrical Construction Industries. Journal of Construction Engineering and Management, 139(10).

Haronian, E and Sacks, R (2021) Production Control in Earthworks: Concepts and Metrics. Journal of Construction Engineering and Management, 147(10).

Harper, C M, Molenaar, K R and Cannon, J P (2016) Measuring Constructs of Relational Contracting in Construction Projects: The Owner’s Perspective. Journal of Construction Engineering and Management, 142(10).

Hartmann, T, Gao, J and Fischer, M (2008) Areas of Application for 3D and 4D Models on Construction Projects. Journal of Construction Engineering and Management, 134(10), 776–85.

Hasanzadeh, S, Esmaeili, B and Dodd, M D (2017) Impact of Construction Workers’ Hazard Identification Skills on Their Visual Attention. Journal of Construction Engineering and Management, 143(10).

Hassandokht Mashhadi, A, Handy, R, Farhadmanesh, M, Rashidi, A, Honda, T, Sleeth, D K and Henry, T (2022) Feasibility Study of Using Nebulizer-Retrofitted UAVs at Construction Projects: The Case Study of Residential Jobsites in Utah. Journal of Construction Engineering and Management, 148(10).

Haycraft, W R (2011) History of Construction Equipment. Journal of Construction Engineering and Management, 137(10), 720–3.

He, W, Li, W, Xu, S, Wang, W and An, X (2021) Time, Cost, and Energy Consumption Analysis on Construction Optimization in High-Rise Buildings. Journal of Construction Engineering and Management, 147(10).

Hegazy, T and Menesi, W (2010) Critical Path Segments Scheduling Technique. Journal of Construction Engineering and Management, 136(10), 1078–85.

Hegazy, T, Saad, D A and Mostafa, K (2020) Enhanced Repetitive-Scheduling Computation and Visualization. Journal of Construction Engineering and Management, 146(10).

Heravi, G and Eslamdoost, E (2015) Applying Artificial Neural Networks for Measuring and Predicting Construction-Labor Productivity. Journal of Construction Engineering and Management, 141(10).

Hijazi, A A, Perera, S, Calheiros, R N and Alashwal, A (2021) Rationale for the Integration of BIM and Blockchain for the Construction Supply Chain Data Delivery: A Systematic Literature Review and Validation through Focus Group. Journal of Construction Engineering and Management, 147(10).

Hinze, J, Hallowell, M and Baud, K (2013) Construction-Safety Best Practices and Relationships to Safety Performance. Journal of Construction Engineering and Management, 139(10).

Hong, Y, Tian, Z and Sun, X (2020) Dynamic Evaluation for Compaction Quality of Roller Compacted Concrete based on Reliability Metrics. Journal of Construction Engineering and Management, 146(10).

Hong, Y, Xie, H, Bhumbra, G and Brilakis, I (2021) Comparing Natural Language Processing Methods to Cluster Construction Schedules. Journal of Construction Engineering and Management, 147(10).

Howell, G A (2011) New Operating System for Project Management: Consequences and Opportunities. Journal of Construction Engineering and Management, 137(10), 882–6.

Howell, G A, Ballard, G and Tommelein, I (2011) Construction Engineering—Reinvigorating the Discipline. Journal of Construction Engineering and Management, 137(10), 740–4.

Huang, W, Tserng, H P, Jaselskis, E J and Lee, S (2014) Dynamic Threshold Cash Flow–Based Structural Model for Contractor Financial Prequalification. Journal of Construction Engineering and Management, 140(10).

Hyari, K H, Shatarat, N and Khalafallah, A (2017) Handling Risks of Quantity Variations in Unit-Price Contracts. Journal of Construction Engineering and Management, 143(10).

Ibbs, W and Nguyen, L D (2007) Alternative for Quantifying Field-Overhead Damages. Journal of Construction Engineering and Management, 133(10), 736–42.

Ioannou, P G (2019) Friedman’s Bidding Model: Errors and Corrections. Journal of Construction Engineering and Management, 145(10).

Jahren, C T and Johnston, D W (2011) Linkages between Construction Engineering Education and Research. Journal of Construction Engineering and Management, 137(10), 887–94.

Jang, Y, Kim, K, Leite, F, Ayer, S and Cho, Y K (2021) Identifying the Perception Differences of Emerging Construction-Related Technologies between Industry and Academia to Enable High Levels of Collaboration. Journal of Construction Engineering and Management, 147(10).

Jaselskis, E, Ruwanpura, J, Becker, T, Silva, L, Jewell, P and Floyd, E (2011) Innovation in Construction Engineering Education Using Two Applications of Internet-Based Information Technology to Provide Real-Time Project Observations. Journal of Construction Engineering and Management, 137(10), 829–35.

Kale, S and Arditi, D (2005) Diffusion of Computer Aided Design Technology in Architectural Design Practice. Journal of Construction Engineering and Management, 131(10), 1135–41.

Kamardeen, I and Hasan, A (2022) Occupational Health and Safety Implications of an Aging Workforce in the Australian Construction Industry. Journal of Construction Engineering and Management, 148(10).

Kamardeen, I and Sunindijo, R Y (2017) Personal Characteristics Moderate Work Stress in Construction Professionals. Journal of Construction Engineering and Management, 143(10).

Kamat, V R, Martinez, J C, Fischer, M, Golparvar-Fard, M, Peña-Mora, F and Savarese, S (2011) Research in Visualization Techniques for Field Construction. Journal of Construction Engineering and Management, 137(10), 853–62.

Kannan, G (2011) Field Studies in Construction Equipment Economics and Productivity. Journal of Construction Engineering and Management, 137(10), 823–8.

Kassab, M, Hipel, K and Hegazy, T (2006) Conflict Resolution in Construction Disputes Using the Graph Model. Journal of Construction Engineering and Management, 132(10), 1043–52.

Ke, Y, Wang, S, Chan, A P and Cheung, E (2009) Research Trend of Public-Private Partnership in Construction Journals. Journal of Construction Engineering and Management, 135(10), 1076–86.

Khalafallah, A, Kartam, N and Razeq, R A (2019) Bilevel Standards-Compliant Platform for Evaluating Building Contractor Safety. Journal of Construction Engineering and Management, 145(10).

Kheni, N A, Gibb, A G F and Dainty, A R J (2010) Health and Safety Management within Small- and Medium-Sized Enterprises (SMEs) in Developing Countries: Study of Contextual Influences. Journal of Construction Engineering and Management, 136(10), 1104–15.

Kim, H, Orr, K, Shen, Z, Moon, H, Ju, K and Choi, W (2014) Highway Alignment Construction Comparison Using Object-Oriented 3D Visualization Modeling. Journal of Construction Engineering and Management, 140(10).

Kim, J, Kamari, M, Lee, S and Ham, Y (2021) Large-Scale Visual Data–Driven Probabilistic Risk Assessment of Utility Poles Regarding the Vulnerability of Power Distribution Infrastructure Systems. Journal of Construction Engineering and Management, 147(10).

Kim, J, Shan, Y, Kim, S, Song, D, Park, H and Bang, C (2021) Factors Influencing Fire Safety on Building Construction Sites: A Fire Officer’s Perspective. Journal of Construction Engineering and Management, 147(10).

Kim, T, Lim, H, Cho, H and Kang, K (2014) Automated Lifting System Integrated with Construction Hoists for Table Formwork in Tall Buildings. Journal of Construction Engineering and Management, 140(10).

Kisi, K P, Mani, N, Rojas, E M and Foster, E T (2018) Estimation of Optimal Productivity in Labor-Intensive Construction Operations: Advanced Study. Journal of Construction Engineering and Management, 144(10).

Koc, K and Okudan, O (2021) Assessment of Life Cycle Risks of Deconstruction in Urban Regeneration Projects. Journal of Construction Engineering and Management, 147(10).

Kumaraswamy, M M, Ling, F Y, Rahman, M M and Phng, S T (2005) Constructing Relationally Integrated Teams. Journal of Construction Engineering and Management, 131(10), 1076–86.

Kumaraswamy, M M, Rahman, M M, Ling, F Y and Phng, S T (2005) Reconstructing Cultures for Relational Contracting. Journal of Construction Engineering and Management, 131(10), 1065–75.

Kurwi, S, Demian, P, Hassan, T M and Blay, K B (2022) A Process Model for Collaboration at the Design Stage of Rail Project Delivery. Journal of Construction Engineering and Management, 148(10).

Lagos, C I, Herrera, R F and Alarcón, L F (2019) Assessing the Impacts of an IT LPS Support System on Schedule Accomplishment in Construction Projects. Journal of Construction Engineering and Management, 145(10).

Lam, K, Ning, X and Lam, M C (2009) Conjoining MMAS to GA to Solve Construction Site Layout Planning Problem. Journal of Construction Engineering and Management, 135(10), 1049–57.

Lapinski, A R, Horman, M J and Riley, D R (2006) Lean Processes for Sustainable Project Delivery. Journal of Construction Engineering and Management, 132(10), 1083–91.

Le, C, Jeong, H D and Damnjanovic, I (2021) Network Theory–Driven Construction Logic Knowledge Network: Process Modeling and Application in Highway Projects. Journal of Construction Engineering and Management, 147(10).

Lee, E, Lee, H and Ibbs, C W (2007) Productivity Aspects of Urban Freeway Rehabilitation with Accelerated Construction. Journal of Construction Engineering and Management, 133(10), 798–806.

Lei, Z, Taghaddos, H, Olearczyk, J, Al-Hussein, M and Hermann, U (2013) Automated Method for Checking Crane Paths for Heavy Lifts in Industrial Projects. Journal of Construction Engineering and Management, 139(10).

Leu, S and Lin, Y (2008) Project Performance Evaluation Based on Statistical Process Control Techniques. Journal of Construction Engineering and Management, 134(10), 813–9.

Leung, M, Chan, Y and Yuen, K (2010) Impacts of Stressors and Stress on the Injury Incidents of Construction Workers in Hong Kong. Journal of Construction Engineering and Management, 136(10), 1093–103.

Li, M and Ashuri, B (2021) Proportional Cox Hazards Model to Quantify the Likelihood of Underestimation in Transportation Projects. Journal of Construction Engineering and Management, 147(10).

Li, N, Du, J, González, V A and Chen, J (2022) Methodology for Extended Reality–Enabled Experimental Research in Construction Engineering and Management. Journal of Construction Engineering and Management, 148(10).

Liang, C, Wang, X, Kamat, V R and Menassa, C C (2021) Human–Robot Collaboration in Construction: Classification and Research Trends. Journal of Construction Engineering and Management, 147(10).

Lin, S and Cheung, S O (2022) Intention to Settle as an Indispensable Element of Negotiated Construction Dispute Settlement. Journal of Construction Engineering and Management, 148(10).

Lin, Y, Wu, D, Wang, X, Wang, X and Gao, S (2012) Statics-Based Simulation Approach for Two-Crane Lift. Journal of Construction Engineering and Management, 138(10), 1139–49.

Ling, F Y Y, Pham, V M C and Hoang, T P (2009) Strengths, Weaknesses, Opportunities, and Threats for Architectural, Engineering, and Construction Firms: Case Study of Vietnam. Journal of Construction Engineering and Management, 135(10), 1105–13.

Lingard, H, Brown, K, Bradley, L, Bailey, C and Townsend, K (2007) Improving Employees’ Work-Life Balance in the Construction Industry: Project Alliance Case Study. Journal of Construction Engineering and Management, 133(10), 807–15.

Lingard, H, Zhang, R P, LaBond, C, Clarke, J and Doan, T (2022) Situated Learning: How Interactions with Supervisors Shape Construction Apprentices’ Safety Learning and Practice. Journal of Construction Engineering and Management, 148(10).

Liu, J, Shahi, A, Haas, C T, Goodrum, P and Caldas, C H (2014) Validation Methodologies and Their Impact in Construction Productivity Research. Journal of Construction Engineering and Management, 140(10).

Lu, W, Wu, L, Zhao, R, Li, X and Xue, F (2021) Blockchain Technology for Governmental Supervision of Construction Work: Learning from Digital Currency Electronic Payment Systems. Journal of Construction Engineering and Management, 147(10).

Lu, Y and Zhu, Y (2021) Integrating Hoisting Efficiency into Construction Site Layout Plan Model for Prefabricated Construction. Journal of Construction Engineering and Management, 147(10).

Lucko, G (2011) Modeling the Residual Market Value of Construction Equipment under Changed Economic Conditions. Journal of Construction Engineering and Management, 137(10), 806–16.

Luth, G P (2011) VDC and the Engineering Continuum. Journal of Construction Engineering and Management, 137(10), 906–15.

Ma, G, Gu, L and Li, N (2015) Scenario-Based Proactive Robust Optimization for Critical-Chain Project Scheduling. Journal of Construction Engineering and Management, 141(10).

Mani, N, Kisi, K P, Rojas, E M and Foster, E T (2017) Estimating Construction Labor Productivity Frontier: Pilot Study. Journal of Construction Engineering and Management, 143(10).

Mantha, B R K and Garcia de Soto, B (2022) Investigating the Fiducial Marker Network Characteristics for Autonomous Mobile Indoor Robot Navigation Using ROS and Gazebo. Journal of Construction Engineering and Management, 148(10).

Martek, I and Chen, C (2013) Localization Typologies Evident among Foreign Enterprises Active in the Chinese Construction Market. Journal of Construction Engineering and Management, 139(10).

Mbabazi, A, Hegazy, T and Saccomanno, F (2005) Modified But-For Method for Delay Analysis. Journal of Construction Engineering and Management, 131(10), 1142–4.

McTavish, R and Stallard, R (2011) Construction Engineering Today1. Journal of Construction Engineering and Management, 137(10), 724–9.

Minchin, R E, Li, X, Issa, R R and Vargas, G G (2013) Comparison of Cost and Time Performance of Design-Build and Design-Bid-Build Delivery Systems in Florida. Journal of Construction Engineering and Management, 139(10).

Mitchell, Z, Hildreth, J and Vorster, M (2011) Using the Cumulative Cost Model to Forecast Equipment Repair Costs: Two Different Methodologies. Journal of Construction Engineering and Management, 137(10), 817–22.

Mitropoulos, P and Memarian, B (2012) Team Processes and Safety of Workers: Cognitive, Affective, and Behavioral Processes of Construction Crews. Journal of Construction Engineering and Management, 138(10), 1181–91.

Mohamed, Y and AbouRizk, S (2005) Application of the Theory of Inventive Problem Solving in Tunnel Construction. Journal of Construction Engineering and Management, 131(10), 1099–108.

Monnot, J M and Williams, R C (2011) Construction Equipment Telematics. Journal of Construction Engineering and Management, 137(10), 793–6.

Moret, Y and Einstein, H H (2016) Construction Cost and Duration Uncertainty Model: Application to High-Speed Rail Line Project. Journal of Construction Engineering and Management, 142(10).

Moselhi, O and Alshibani, A (2009) Optimization of Earthmoving Operations in Heavy Civil Engineering Projects. Journal of Construction Engineering and Management, 135(10), 948–54.

Na, L J, Ofori, G and Park, M (2006) Stimulating Construction Innovation in Singapore through the National System of Innovation. Journal of Construction Engineering and Management, 132(10), 1069–82.

Naji, K K, Gunduz, M and Hamaidi, M F (2022) Major Factors Affecting Construction Waste Management in Infrastructure Projects Using Structural Equation Model. Journal of Construction Engineering and Management, 148(10).

Namian, M, Albert, A, Zuluaga, C M and Jaselskis, E J (2016) Improving Hazard-Recognition Performance and Safety Training Outcomes: Integrating Strategies for Training Transfer. Journal of Construction Engineering and Management, 142(10).

Negash, Y T and Hassan, A M (2020) Construction Project Success under Uncertainty: Interrelations among the External Environment, Intellectual Capital, and Project Attributes. Journal of Construction Engineering and Management, 146(10).

Nguyen, P H D, Lines, B C and Tran, D Q (2018) Best-Value Procurement in Design-Bid-Build Construction Projects: Empirical Analysis of Selection Outcomes. Journal of Construction Engineering and Management, 144(10).

Oguz Erkal, E D, Hallowell, M R and Bhandari, S (2021) Practical Assessment of Potential Predictors of Serious Injuries and Fatalities in Construction. Journal of Construction Engineering and Management, 147(10).

Oo, B, Drew, D S and Lo, H (2008) Heterogeneous Approach to Modeling Contractors' Decision-to-Bid Strategies. Journal of Construction Engineering and Management, 134(10), 766–75.

Orabi, W, El-Rayes, K, Senouci, A B and Al-Derham, H (2009) Optimizing Postdisaster Reconstruction Planning for Damaged Transportation Networks. Journal of Construction Engineering and Management, 135(10), 1039–48.

Oswald, D and Dainty, A (2020) Ethnographic Research in the Construction Industry: A Critical Review. Journal of Construction Engineering and Management, 146(10).

Paquin, J, Morin, P, Lambert, A and Koplyay, T (2022) Assessing Project Contingency Reserves with the Expected Cost Overrun Risk Measure. Journal of Construction Engineering and Management, 148(10).

Park, J, Cai, H, Dunston, P S and Ghasemkhani, H (2017) Database-Supported and Web-Based Visualization for Daily 4D BIM. Journal of Construction Engineering and Management, 143(10).

Perng, Y, Juan, Y and Chien, S (2006) Exploring the Bidding Situation for Economically Most Advantageous Tender Projects Using a Bidding Game. Journal of Construction Engineering and Management, 132(10), 1037–42.

Pirzadeh, P, Lingard, H and Blismas, N (2021) Design Decisions and Interactions: A Sociotechnical Network Perspective. Journal of Construction Engineering and Management, 147(10).

Pons, O, Casanovas-Rubio, M M, Armengou, J and de la Fuente, A (2021) Sustainability-Driven Decision-Making Model: Case Study of Fiber-Reinforced Concrete Foundation Piles. Journal of Construction Engineering and Management, 147(10).

Poshdar, M, González, V A, Raftery, G M, Orozco, F, Romeo, J S and Forcael, E (2016) A Probabilistic-Based Method to Determine Optimum Size of Project Buffer in Construction Schedules. Journal of Construction Engineering and Management, 142(10).

Powell, R and Copping, A (2010) Sleep Deprivation and Its Consequences in Construction Workers. Journal of Construction Engineering and Management, 136(10), 1086–92.

Prasertrungruang, T and Hadikusumo, B H W (2009) Modeling the Dynamics of Heavy Equipment Management Practices and Downtime in Large Highway Contractors. Journal of Construction Engineering and Management, 135(10), 939–47.

Praticò, F G, Antonio, C and Domenico, T (2012) Influence of Dispersion and Location on Pay Adjustment in Construction Engineering. Journal of Construction Engineering and Management, 138(10), 1125–30.

Pushpakumara, B H J and Thusitha, G A (2021) Development of a Structural Health Monitoring Tool for Underwater Concrete Structures. Journal of Construction Engineering and Management, 147(10).

Rahman, M M and Kumaraswamy, M M (2005) Relational Selection for Collaborative Working Arrangements. Journal of Construction Engineering and Management, 131(10), 1087–98.

Rajendran, S and Gambatese, J A (2009) Development and Initial Validation of Sustainable Construction Safety and Health Rating System. Journal of Construction Engineering and Management, 135(10), 1067–75.

Rajendran, S, Gambatese, J A and Behm, M G (2009) Impact of Green Building Design and Construction on Worker Safety and Health. Journal of Construction Engineering and Management, 135(10), 1058–66.

Ramaji, I J and Memari, A M (2016) Product Architecture Model for Multistory Modular Buildings. Journal of Construction Engineering and Management, 142(10).

Randall, T (2011) Construction Engineering Requirements for Integrating Laser Scanning Technology and Building Information Modeling. Journal of Construction Engineering and Management, 137(10), 797–805.

Raouf, A M and Al-Ghamdi, S G (2019) Effectiveness of Project Delivery Systems in Executing Green Buildings. Journal of Construction Engineering and Management, 145(10).

Retamal, F, Salazar, L A and Alarcón, L F (2022) Online Monitoring and Implementation of Commitment Management Performance and Its Impact on Project Planning in Four Construction Projects. Journal of Construction Engineering and Management, 148(10).

Rojas, E M (2008) Single versus Multiple Prime Contracting. Journal of Construction Engineering and Management, 134(10), 758–65.

Russell, M M, Howell, G, Hsiang, S M and Liu, M (2013) Application of Time Buffers to Construction Project Task Durations. Journal of Construction Engineering and Management, 139(10).

Sadeh, H, Mirarchi, C and Pavan, A (2021) Integrated Approach to Construction Risk Management: Cost Implications. Journal of Construction Engineering and Management, 147(10).

Salas-Morera, L, Arauzo-Azofra, A, García-Hernández, L, Palomo-Romero, J M and Ayuso-Muñoz, J L (2018) New Approach to the Distribution of Project Completion Time in PERT Networks. Journal of Construction Engineering and Management, 144(10).

Salas, R and Hallowell, M (2016) Predictive Validity of Safety Leading Indicators: Empirical Assessment in the Oil and Gas Sector. Journal of Construction Engineering and Management, 142(10).

Sanders, S A and Shapira, A (2011) Windmill Erection and Maintenance: Challenges for Crane Design. Journal of Construction Engineering and Management, 137(10), 777–84.

Schexnayder, C and Anderson, S (2011) Construction Engineering Education: History and Challenge. Journal of Construction Engineering and Management, 137(10), 730–9.

Schexnayder, C, Celaya, M, Recavarren, G C, Fiori, C and Jaselskis, E J (2011) Engineering with the Elements. Journal of Construction Engineering and Management, 137(10), 755–61.

Sellés, M E, Rubio, J A and Mullor, J R (2008) Development of a Quantification Proposal for Hidden Quality Costs: Applied to the Construction Sector. Journal of Construction Engineering and Management, 134(10), 749–57.

Sezer, A A, Thunberg, M and Wernicke, B (2021) Digitalization Index: Developing a Model for Assessing the Degree of Digitalization of Construction Projects. Journal of Construction Engineering and Management, 147(10).

Shahandashti, S M, Razavi, S N, Soibelman, L, Berges, M, Caldas, C H, Brilakis, I, Teizer, J, Vela, P A, Haas, C, Garrett, J, Akinci, B and Zhu, Z (2011) Data-Fusion Approaches and Applications for Construction Engineering. Journal of Construction Engineering and Management, 137(10), 863–9.

Shapira, A and Goldenberg, M (2007) “Soft” Considerations in Equipment Selection for Building Construction Projects. Journal of Construction Engineering and Management, 133(10), 749–60.

Shapira, A and Simcha, M (2009) Measurement and Risk Scales of Crane-Related Safety Factors on Construction Sites. Journal of Construction Engineering and Management, 135(10), 979–89.

Shealy, T and Klotz, L (2015) Well-Endowed Rating Systems: How Modified Defaults Can Lead to More Sustainable Performance. Journal of Construction Engineering and Management, 141(10).

Shen, Y and Luo, Y Z (2010) Accumulative Sliding Construction Method for Large-Span Latticed Shells. Journal of Construction Engineering and Management, 136(10), 1154–7.

Shin, S and Issa, R R A (2021) BIMASR: Framework for Voice-Based BIM Information Retrieval. Journal of Construction Engineering and Management, 147(10).

Shoaib Khan, M, Kim, J, Park, S, Lee, S and Seo, J (2021) Methodology for Voxel-Based Earthwork Modeling. Journal of Construction Engineering and Management, 147(10).

Showalter, W E and Halpin, D W (2008) Dynamic Programming Approach to Optimization of Site Remediation. Journal of Construction Engineering and Management, 134(10), 820–7.

Simmons, D R, Iorio, J, Taylor, J E and Li, D (2018) Work Values across Generations among Construction Professionals in the United States. Journal of Construction Engineering and Management, 144(10).

Sing, C, Love, P E D and Tam, C M (2012) Multiplier Model for Forecasting Manpower Demand. Journal of Construction Engineering and Management, 138(10), 1161–8.

Skibniewski, M J and Ghosh, S (2009) Determination of Key Performance Indicators with Enterprise Resource Planning Systems in Engineering Construction Firms. Journal of Construction Engineering and Management, 135(10), 965–78.

Song, J, Song, D and Zhang, D (2015) Modeling the Concession Period and Subsidy for BOT Waste-to-Energy Incineration Projects. Journal of Construction Engineering and Management, 141(10).

Song, L and AbouRizk, S M (2008) Measuring and Modeling Labor Productivity Using Historical Data. Journal of Construction Engineering and Management, 134(10), 786–94.

Spielholz, P, Davis, G and Griffith, J (2006) Physical Risk Factors and Controls for Musculoskeletal Disorders in Construction Trades. Journal of Construction Engineering and Management, 132(10), 1059–68.

Srour, I M, Haas, C T and Borcherding, J D (2006) What Does the Construction Industry Value in Its Workers?. Journal of Construction Engineering and Management, 132(10), 1053–8.

Stemp, B A and Walewski, J (2011) Lampson Transi-Lift Mobile Crane: Concept, Design, and Use. Journal of Construction Engineering and Management, 137(10), 785–92.

Su, X, Li, S, Yuan, C, Cai, H and Kamat, V R (2014) Enhanced Boundary Condition–Based Approach for Construction Location Sensing Using RFID and RTK GPS. Journal of Construction Engineering and Management, 140(10).

Sunindijo, R Y and Kamardeen, I (2017) Work Stress Is a Threat to Gender Diversity in the Construction Industry. Journal of Construction Engineering and Management, 143(10).

Sveikauskas, L, Rowe, S, Mildenberger, J, Price, J and Young, A (2016) Productivity Growth in Construction. Journal of Construction Engineering and Management, 142(10).

Tabish, S Z S and Jha, K N (2012) Success Traits for a Construction Project. Journal of Construction Engineering and Management, 138(10), 1131–8.

Tan, Y, Shen, L and Langston, C (2010) Contractors’ Competition Strategies in Bidding: Hong Kong Study. Journal of Construction Engineering and Management, 136(10), 1069–77.

Taneja, S, Akinci, B, Garrett, J H, Soibelman, L, Ergen, E, Pradhan, A, Tang, P, Berges, M, Atasoy, G, Liu, X, Shahandashti, S M and Anil, E B (2011) Sensing and Field Data Capture for Construction and Facility Operations. Journal of Construction Engineering and Management, 137(10), 870–81.

Tang, C M, Leung, A Y and Lam, K C (2006) Entropy Application to Improve Construction Finance Decisions. Journal of Construction Engineering and Management, 132(10), 1099–113.

Tatum, C B (2011) Core Elements of Construction Engineering Knowledge for Project and Career Success. Journal of Construction Engineering and Management, 137(10), 745–50.

Taylor, J E, Levitt, R and Villarroel, J A (2009) Simulating Learning Dynamics in Project Networks. Journal of Construction Engineering and Management, 135(10), 1009–15.

Tetteh, M O and Chan, A P C (2019) Review of Concepts and Trends in International Construction Joint Ventures Research. Journal of Construction Engineering and Management, 145(10).

Tian, D, Li, M, Han, S and Shen, Y (2022) A Novel and Intelligent Safety-Hazard Classification Method with Syntactic and Semantic Features for Large-Scale Construction Projects. Journal of Construction Engineering and Management, 148(10).

Tino Balestra, C E, Alessi Reichert, T, Savaris, G, Pansera, W A and A. Medeiros-Junior, R (2020) Nondestructive Method for Estimation of Chloride Profiles: Correlation between Electrical Resistivity and Holliday-Empirical Equation. Journal of Construction Engineering and Management, 146(10).

Tsai, J and Chi, C S F (2009) Influences of Chinese Cultural Orientations and Conflict Management Styles on Construction Dispute Resolving Strategies. Journal of Construction Engineering and Management, 135(10), 955–64.

Tuchman, J L (2017) Why Journalism Matters. Journal of Construction Engineering and Management, 143(10).

Umer, W, Li, H, Szeto, G P Y and Wong, A Y L (2017) Low-Cost Ergonomic Intervention for Mitigating Physical and Subjective Discomfort during Manual Rebar Tying. Journal of Construction Engineering and Management, 143(10).

Valdes-Vasquez, R and Klotz, L E (2013) Using the Concept-Mapping Method for Empirical Studies in Construction Research. Journal of Construction Engineering and Management, 139(10).

Vorster, M C (2011) Teaching and Learning: The Critical Balance in Effective Education. Journal of Construction Engineering and Management, 137(10), 916–22.

Wagner, H, Kim, A J and Gordon, L (2013) Relationship between Personal Protective Equipment, Self-Efficacy, and Job Satisfaction of Women in the Building Trades. Journal of Construction Engineering and Management, 139(10).

Wambeke, B W, Liu, M and Hsiang, S M (2012) Using Pajek and Centrality Analysis to Identify a Social Network of Construction Trades. Journal of Construction Engineering and Management, 138(10), 1192–201.

Wanberg, J, Harper, C, Hallowell, M R and Rajendran, S (2013) Relationship between Construction Safety and Quality Performance. Journal of Construction Engineering and Management, 139(10).

Wang, B, Geng, L, Dang, P and Zhang, L (2022) Developing a Framework for Dynamic Organizational Resilience Analysis in Prefabricated Construction Projects: A Project Life Cycle Perspective. Journal of Construction Engineering and Management, 148(10).

Wang, C, Loo, S C, Yap, J B H and Abdul-Rahman, H (2019) Novel Capability-Based Risk Assessment Calculator for Construction Contractors Venturing Overseas. Journal of Construction Engineering and Management, 145(10).

Wang, P, Mohamed, Y, Abourizk, S M and Rawa, A R T (2009) Flow Production of Pipe Spool Fabrication: Simulation to Support Implementation of Lean Technique. Journal of Construction Engineering and Management, 135(10), 1027–38.

Wang, Y, Goodrum, P M, Haas, C T and Glover, R W (2009) Analysis of Observed Skill Affinity Patterns and Motivation for Multiskilling among Craft Workers in the U.S. Industrial Construction Sector. Journal of Construction Engineering and Management, 135(10), 999–1008.

Wang, Y, Goodrum, P M, Haas, C T and Glover, R W (2008) Craft Training Issues in American Industrial and Commercial Construction. Journal of Construction Engineering and Management, 134(10), 795–803.

Weinstein, M, Gambatese, J and Hecker, S (2005) Can Design Improve Construction Safety?: Assessing the Impact of a Collaborative Safety-in-Design Process. Journal of Construction Engineering and Management, 131(10), 1125–34.

Williams, T, Bernold, L and Lu, H (2007) Adoption Patterns of Advanced Information Technologies in the Construction Industries of the United States and Korea. Journal of Construction Engineering and Management, 133(10), 780–90.

Wondimu, P A, Lohne, J and Lædre, O (2018) Competitive Dialogue in Norwegian Public Infrastructure Projects. Journal of Construction Engineering and Management, 144(10).

Wong, C K, Fung, I W H and Tam, C M (2010) Comparison of Using Mixed-Integer Programming and Genetic Algorithms for Construction Site Facility Layout Planning. Journal of Construction Engineering and Management, 136(10), 1116–28.

Wong, P S P and Lam, K Y (2012) Facing Turbulence: Driving Force for Construction Organizations to Regain Unlearning and Learning Traction. Journal of Construction Engineering and Management, 138(10), 1202–11.

Wong, P S, Cheung, S O and Ho, P K (2005) Contractor as Trust Initiator in Construction Partnering—Prisoner’s Dilemma Perspective. Journal of Construction Engineering and Management, 131(10), 1045–53.

Wu, H, Zhang, P, Li, H, Zhong, B, Fung, I W H and Lee, Y Y R (2022) Blockchain Technology in the Construction Industry: Current Status, Challenges, and Future Directions. Journal of Construction Engineering and Management, 148(10).

Wu, K and García de Soto, B (2021) Lifting Sequence Optimization of Luffing Tower Cranes Considering Motion Paths with Dynamic Programming. Journal of Construction Engineering and Management, 147(10).

Xiang, Z, Rashidi, A and Ou, G (2021) Automated Framework to Translate Rebar Spatial Information from GPR into BIM. Journal of Construction Engineering and Management, 147(10).

Xue, H, Sun, T and Zheng, J (2022) Organizational Elements and Collaborative Organizational Citizenship Behavior in Off-Site Construction Projects: Configurational Approach. Journal of Construction Engineering and Management, 148(10).

Yasamis-Speroni, F, Lee, D and Arditi, D (2012) Evaluating the Quality Performance of Pavement Contractors. Journal of Construction Engineering and Management, 138(10), 1114–24.

Yiu, T W, Cheung, S O and Mok, F M (2006) Logistic Likelihood Analysis of Mediation Outcomes. Journal of Construction Engineering and Management, 132(10), 1026–36.

Yoon, Y and GangaRao, H (2021) Prioritization Framework for Rockfall Countermeasures for Rock-Cut Slopes for Rural Roads. Journal of Construction Engineering and Management, 147(10).

Yu, J, Lee, H and Kim, W (2006) Evaluation Model for Information Systems Benefits in Construction Management Processes. Journal of Construction Engineering and Management, 132(10), 1114–21.

Yuventi, J, Levitt, R and Robertson, H (2013) Organizational Barriers to Productivity and Innovation in Large-Scale, U.S.-Based Photovoltaic System Construction Projects. Journal of Construction Engineering and Management, 139(10).

Zhang, G and Zou, P X (2007) Fuzzy Analytical Hierarchy Process Risk Assessment Approach for Joint Venture Construction Projects in China. Journal of Construction Engineering and Management, 133(10), 771–9.

Zhang, L, Pan, C and Zou, X (2013) Criticality Comparison between the Repetitive Scheduling Method and the Network Model. Journal of Construction Engineering and Management, 139(10).

Zhang, L, Yao, Y and Yiu, T W (2020) Job Burnout of Construction Project Managers: Exploring the Consequences of Regulating Emotions in Workplace. Journal of Construction Engineering and Management, 146(10).

Zhang, X (2005) Concessionaire’s Financial Capability in Developing Build-Operate-Transfer Type Infrastructure Projects. Journal of Construction Engineering and Management, 131(10), 1054–64.

Zhang, Y, Minchin, R E and Agdas, D (2017) Forecasting Completed Cost of Highway Construction Projects Using LASSO Regularized Regression. Journal of Construction Engineering and Management, 143(10).

Zhao, D, Duva, M, Mollaoglu, S, Frank, K, Garcia, A and Tait, J (2021) Integrative Collaboration in Fragmented Project Organizations: Network Perspective. Journal of Construction Engineering and Management, 147(10).

Zhou, Z, Li, Q and Wu, W (2012) Developing a Versatile Subway Construction Incident Database for Safety Management. Journal of Construction Engineering and Management, 138(10), 1169–80.

Zhu, J, Hertogh, M, Zhang, J, Shi, Q and Sheng, Z (2020) Incentive Mechanisms in Mega Project-Risk Management Considering Owner and Insurance Company as Principals. Journal of Construction Engineering and Management, 146(10).

Zhu, Q, Zhou, T, Xia, P and Du, J (2022) Robot Planning for Active Collision Avoidance in Modular Construction: Pipe Skids Example. Journal of Construction Engineering and Management, 148(10).