Abstracts – Browse Results

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 25 results ...

Abu Hanipah, A F F and Tahar, K N (2018) Development of the 3D dome model based on a terrestrial laser scanner. International Journal of Building Pathology and Adaptation, 36(02), 122–36.

Adebisi, E O, Ojo, S O and Alao, O O (2018) Assessment of factors influencing the failure and abandonment of multi-storey building projects in Nigeria. International Journal of Building Pathology and Adaptation, 36(02), 210–31.

Belabed, Y, Kerboua, B and Tarfaoui, M (2019) New design for reducing interfacial stresses of reinforced structures with FRP plates. International Journal of Building Pathology and Adaptation, 37(02), 196–207.

  • Type: Journal Article
  • Keywords: Interfacial stresses; Taper; Shear stress; FRP composites; Strengthening;
  • ISBN/ISSN: 2398-4708
  • URL: https://doi.org/10.1108/IJBPA-09-2018-0073
  • Abstract:
    The sustainability of the structures is not only a technical goal, but also a matter of social and environmental values. This requires the researchers to use very rigid, highly durable and corrosion-resistant composite structures in order to achieve the technical, environmental and social goals. The purpose of this paper is to present an original work on reducing the interfacial stresses of bonded structures with fibre-reinforced polymers (FRP) plates based on new taper design. Design/methodology/approach In this proposed concept, the effect of combined taper is investigated on reducing interfacial stresses, attempting to enhance the structure performance and address the debonding problem that comes with reinforcing techniques. This research is carried out by using finite element analysis, incorporating many new parameters. Findings As a result, a new solution is discovered that combined taper in both adhesive layer and composite laminate, which significantly reduces the interfacial stresses at the end of the FRP plate. Additionally, a parametric study is carried out in order to determine the optimal configurations of taper dimensions as well as other parameters that influence the stress concentration distribution at the edge of the adherends. Practical implications This new design regarding the reduction of interfacial stresses will help in increasing the lifespan of damaged structures reinforced by FRP composites, preserving thus its technical, historical and social values. Originality/value The paper uses straight, concave and convex fillets with inverse taper as a new design solution with new parameters including thermo-mechanical loads and pre-stressed FRP plate with multi-layer, fibre orientation and shear-lag effects.

Chew, M Y, Conejos, S and Law, J S L (2017) Green maintainability design criteria for nanostructured titanium dioxide (TiO2) façade coatings. International Journal of Building Pathology and Adaptation, 35(02), 139–58.

Chua, S J L, Zubbir, N B, Ali, A S and Au-Yong, C P (2018) Maintenance of high-rise residential buildings. International Journal of Building Pathology and Adaptation, 36(02), 137–51.

de Bem, D H, Lima, D P B and Medeiros-Junior, R A (2018) Effect of chemical admixtures on concrete’s electrical resistivity. International Journal of Building Pathology and Adaptation, 36(02), 174–87.

Enshassi, A, Elzebdeh, S and Mohamed, S (2017) Drivers affecting household residents’ water and related energy consumption in residential buildings. International Journal of Building Pathology and Adaptation, 35(02), 159–75.

Eriksson, P, Milić, V and Brostrom, T (2019) Balancing preservation and energy efficiency in building stocks. International Journal of Building Pathology and Adaptation, 38(02), 356–73.

Februandari, A (2019) Authenticity in cultural built heritage: learning from Chinese Indonesians’ houses. International Journal of Building Pathology and Adaptation, 38(02), 262–78.

Hadidi, L, Assaf, S, Aluwfi, K and Akrawi, H (2017) The effect of ISO 9001 implementation on the customer satisfaction of the engineering design services. International Journal of Building Pathology and Adaptation, 35(02), 176–90.

Hilal, M, Maqsood, T and Abdekhodaee, A (2019) A scientometric analysis of BIM studies in facilities management. International Journal of Building Pathology and Adaptation, 37(02), 122–39.

Hopkin, T, Lu, S, Rogers, P and Sexton, M (2017) Key stakeholders’ perspectives towards UK new-build housing defects. International Journal of Building Pathology and Adaptation, 35(02), 110–23.

Kulkarni, S S, Chapman, C, Shah, H and Edwards, D J (2018) A computational design method for bio-mimicked horizontal axis tidal turbines. International Journal of Building Pathology and Adaptation, 36(02), 188–209.

Lukito, J A, Susilawati, C and Goonetilleke, A (2019) Climate change adaptation in the management of public buildings: an Indonesian context. International Journal of Building Pathology and Adaptation, 37(02), 140–62.

Mahmoud, A S, Sanni-Anibire, M O and Hassanain, M A (2017) Performance-based fire safety evacuation of an auditorium facility using a theoretical calculation method. International Journal of Building Pathology and Adaptation, 35(02), 124–38.

Mahmoud, A S, Sanni-Anibire, M O, Hassanain, M A and Ahmed, W (2019) Key performance indicators for the evaluation of academic and research laboratory facilities. International Journal of Building Pathology and Adaptation, 37(02), 208–30.

Organ, S (2019) The opportunities and challenges of improving the condition and sustainability of a historic building at an international tourist attraction in the UK. International Journal of Building Pathology and Adaptation, 38(02), 329–55.

Roberts, C J, Pärn, E A, Edwards, D J and Aigbavboa, C (2018) Digitalising asset management: concomitant benefits and persistent challenges. International Journal of Building Pathology and Adaptation, 36(02), 152–73.

Sharma, M and Lee, A (2019) Dementia-friendly heritage settings: a research review. International Journal of Building Pathology and Adaptation, 38(02), 279–310.

Tunefalk, M, Legner, M and Leijonhufvud, G (2019) Long-term effects of additional insulation of building façades in Sweden. International Journal of Building Pathology and Adaptation, 38(02), 374–85.

Watts, G, Fernie, S and Dainty, A (2019) Paradox and legitimacy in construction: how CSR reports restrict CSR practice. International Journal of Building Pathology and Adaptation, 37(02), 231–46.

Whitman, C J, Prizeman, O, Walker, P and Gwilliam, J A (2019) Heritage retrofit and cultural empathy; a discussion of challenges regarding the energy performance of historic UK timber-framed dwellings. International Journal of Building Pathology and Adaptation, 38(02), 386–404.

Zahari, N F, Che-Ani, A I, Abdul Rashid, R B, Mohd Tahir, M A and Amat, S (2019) Factors contribute in development of the assessment framework for wheelchair accessibility in National Heritage Buildings in Malaysia. International Journal of Building Pathology and Adaptation, 38(02), 311–28.

Zalejska Jonsson, A and Hungria Gunnelin, R (2019) Defects in newly constructed residential buildings: owners’ perspective. International Journal of Building Pathology and Adaptation, 37(02), 163–85.

Zolkafli, U K, Zakaria, N, Mohammad Mazlan, A and Ali, A S (2019) Maintenance work for heritage buildings in Malaysia: owners’ perspectives. International Journal of Building Pathology and Adaptation, 37(02), 186–95.