ARCOM Conference Paper Abstracts Database:
Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 67 results ...
Adafin, J, Wilkinson, S, Rotimi, J O B, MacGregor, C, Tookey, J and Potangaroa, R (2022) Creating a case for innovation acceleration in the New Zealand building industry. Construction Innovation, 22(01), 185-204.
- Type: Journal Article
- Keywords: acceleration; emerging technologies; innovation; New Zealand; productivity
- ISBN/ISSN:
- URL: https://doi.org/10.1108/CI-10-2018-0081
- Abstract:
This study aims to examine how innovation can be accelerated within the New Zealand (NZ) building industry to improve the productivity and efficiency of the industry. The study adopted a mixed philosophical approach combining interpretivism and post-positivism. Data for the study were obtained through a focus group of 50 practitioners that were selected using a stratified sampling procedure. All focus group data were audio-recorded, notes of the discussions were taken and then transcribed, de-identified and managed using NVivo software. Data analysis was undertaken using thematic analysis and inductive reasoning consistent with interpretative phenomenological analysis. The study findings revealed that the industry could benefit from the adoption of new and emerging technologies to improve its performance, especially its productivity and efficiency. Key drivers for the adoption of innovative practices included the adaptation of "local best practices" from case studies that would consist of stories of successful innovations that could foster confidence in future innovation. It was also identified that Government and industry should nurture innovation through collaborative contracts, policies and regulations. Further, it was highlighted that a culture of innovation needed to be developed to help nurture competencies and capability within the industry workforce. This study provides an in-depth examination of the need for innovation from the point of view of building industry practitioners. This study provides a useful starting-off point for further research and for the creation of policies that could help to support and accelerate innovation within the NZ building industry. Practical implications: NZ’s building industry productivity and efficiency have been sub-optimal relative to other industries. But using evidence from the experiences and knowledge of industry practitioners, strategies can be developed to accelerate innovation within the NZ building industry that could help reverse industry performance. Further, the research findings can help inform government policies to develop support mechanisms that could encourage innovation in the industry in NZ. In addition, it is anticipated that the findings will provide a useful set of guidance for other countries that have similar market and physical constraints as those encountered by NZ. There is a dearth of empirical studies on innovation in the NZ building industry which the current study contributes to. By sharing industry practitioners’ experiences and knowledge of innovation, the paper seeks to counteract more technocratic and technological optimist accounts of innovation within the building industry. Further, the paper provides insights into how the NZ building industry can transform its performance through innovation.
Adekunle, S A, Aigbavboa, C O, Ejohwomu, O, Adekunle, E A and Thwala, W D (2024) Digital transformation in the construction industry: a bibliometric review. Journal of Engineering, Design and Technology, 22(01), 130-58.
Adeosun, F E and Oke, A E (2024) Examining the awareness and usage of cyber physical systems for construction projects in Nigeria. Journal of Engineering, Design and Technology, 22(01), 281-94.
Afful, A E, Ayarkwa, J, Acquah, G K K, Baah, B, Adjei, E K, Oduro, S and Asiedu-Ampem, G (2026) Towards the Delivery of Environmentally Sustainable Buildings in Ghana: Drivers of Capacity Building. International Journal of Construction Education and Research, 22(01), 27–52.
Ahmad, S B S, Mazhar, M U, Laedre, O, Bruland, A and Torp, O (2022) Improvement measures to achieve sustainable construction labour performance. International Journal of Construction Management, 22(01), 85-102.
Ajibike, W A, Adeleke, A Q, Muuka, G N, Bamgbade, J A, Darun, M R and Moshood, T D (2022) Impact of oil and gas internal risk factors on project success: Moderating role of government support. Construction Economics and Building, 22(01), 47-69.
Al-Aubaidy, N A, Caldas, C H and Mulva, S P (2022) Assessment of underreporting factors on construction safety incidents in US construction projects. International Journal of Construction Management, 22(01), 103-20.
Alazzaz, F and Whyte, A (2015) Linking employee empowerment with productivity in off-site construction. Engineering, Construction and Architectural Management, 22(01), 21-37.
Andalib, M (2026) Predictive Modelling for Contract Selection in Construction Through Data Mining and Machine Learning: Insights from Agency Theory. International Journal of Construction Education and Research, 22(01), 138–63.
Arijeloye, B T, Aje, I O and Oke, A E (2024) Evaluating the key risk factors in PPP-procured mass housing projects in Nigeria: a Delphi study of industry experts. Journal of Engineering, Design and Technology, 22(01), 60-76.
Babalola, A and Harinarain, N (2024) Policy barriers to sustainable construction practice in the Nigerian construction industry: an exploratory factor analysis. Journal of Engineering, Design and Technology, 22(01), 214-34.
Babatunde, S O and Perera, S (2017) Barriers to bond financing for public-private partnership infrastructure projects in emerging markets: A case of Nigeria. Journal of Financial Management of Property and Construction, 22(01), 2-19.
Castronovo, F, Van Meter, P N and Messner, J I (2022) Leveraging metacognitive prompts in construction educational games for higher educational gains. International Journal of Construction Management, 22(01), 19-30.
Chen, L, Lu, Q and Zhao, X (2022) A semi-automatic image-based object recognition system for constructing as-is IFC BIM objects based on fuzzy-maut. International Journal of Construction Management, 22(01), 51-65.
Chen, Q, Adey, B T, Haas, C T and Hall, D M (2022) Exploiting digitalization for the coordination of required changes to improve engineer-to-order materials flow management. Construction Innovation, 22(01), 76-100.
Chen, Y Q, Zhang, S J, Liu, L S and Hu, J (2015) Risk perception and propensity in bid/no-bid decision-making of construction projects. Engineering, Construction and Architectural Management, 22(01), 2-20.
Chen, Z, Li, H, Shen, Q and Xu, W (2004) An empirical model for decision-making on ISO 14000 acceptance in the Shanghai construction industry. Construction Management and Economics, 22(01), 55-73.
Dogan, Y O, Arditi, D and Irlayıcı Cakmak, P (2026) Corporate Universities in Building Construction Companies: Evidence from the U.S.. International Journal of Construction Education and Research, 22(01), 96–118.
Dunn, B (2004) The regionalization of international contracting and its implications for models of construction spending. Construction Management and Economics, 22(01), 93-100.
El-Sayegh, S M and Al-Haj, R (2017) A new framework for time-cost trade-off considering float loss impact. Journal of Financial Management of Property and Construction, 22(01), 20-36.
Gharehbaghi, K, McManus, K, Georgy, M, Farnes, K, Pagliara, F and Myers, M (2024) Verifying the sustainability factors of mega transportation infrastructure: Sydney Metro’s commissioning through the “significance matrix” methodology. Journal of Engineering, Design and Technology, 22(01), 22-41.
Ginigaddara, B, Perera, S, Feng, Y and Rahnamayiezekavat, P (2022) Offsite construction skills evolution: an Australian case study. Construction Innovation, 22(01), 41-56.
Habibi, S (2022) Role of BIM and energy simulation tools in designing zero-net energy homes. Construction Innovation, 22(01), 101-19.
Iyiola, C O and Mewomo, M C (2024) An empirical survey of critical factors influencing students’ electricity use behaviour in halls of residence. Journal of Engineering, Design and Technology, 22(01), 257-80.
Kapindula, M G and Kaliba, C (2022) The effects of external debt servicing on infrastructure spending: A case of Zambia. International Journal of Construction Management, 22(01), 41-50.
Karri, S K, Ponnada, M R and Veerni, L (2024) Durability and microstructure study of alkali-activated slag concrete with quartz sand subjected to different exposure conditions. Journal of Engineering, Design and Technology, 22(01), 42-59.
Karunasena, G and Rajagalgoda, G K (2017) A decision-making formula for value engineering applications in the Sri Lankan construction industry. Journal of Financial Management of Property and Construction, 22(01), 77-91.
Krishnaraj, L, Kumar, V R P, Balasubramanian, M, Kumar, N and Shyamala, T (2022) Futuristic evaluation of building energy simulation model with comparison of conventional villas. International Journal of Construction Management, 22(01), 31-40.
Lavy, S and Shohet, I M (2004) Integrated maintenance management of hospital buildings: a case study. Construction Management and Economics, 22(01), 25-34.
Lawani, K, Arias Abad, L A, Craig, N, Hare, B and Cameron, I (2024) Exploring emotional intelligence and conflict management styles in Dominican Republic construction industry. Journal of Engineering, Design and Technology, 22(01), 89-119.
Le, P L, Chaabane, A and Dao, T M (2022) BIM contributions to construction supply chain management trends: An exploratory study in Canada. International Journal of Construction Management, 22(01), 66-84.
Lingard, H, Saunders, L, Pirzadeh, P, Blismas, N, Kleiner, B and Wakefield, R (2015) The relationship between pre-construction decision-making and the effectiveness of risk control: Testing the time-safety influence curve. Engineering, Construction and Architectural Management, 22(01), 108-24.
Liu, C, M.E. Sepasgozar, S, Shirowzhan, S and Mohammadi, G (2022) Applications of object detection in modular construction based on a comparative evaluation of deep learning algorithms. Construction Innovation, 22(01), 141-59.
Loosemore, M and Richard, J (2015) Valuing innovation in construction and infrastructure: Getting clients past a lowest price mentality. Engineering, Construction and Architectural Management, 22(01), 38-53.
Mahamid, I (2017) Effect of change orders on rework in highway projects in Palestine. Journal of Financial Management of Property and Construction, 22(01), 62-76.
Malaeb, Z and Hamzeh, F R (2022) IPD-inspired framework for measuring stakeholder integration in public-private partnerships. Construction Innovation, 22(01), 160-84.
Manavazhi, M R (2004) Assessment of the propensity for revisions in design projects through the dichotomous characterization of designer effort. Construction Management and Economics, 22(01), 47-54.
Mock, B and O'Connor, J (2022) Taxonomic categories for commissioning and startup hot spot strategies. Construction Innovation, 22(01), 120-40.
Mokhtar, A N S, Wilkinson, S and Fassman, E (2015) Strategies for improving energy saving behaviour in commercial buildings in Malaysia. Engineering, Construction and Architectural Management, 22(01), 73-90.
Moselhi, O, Li, J and Alkass, S (2004) Web-based integrated project control system. Construction Management and Economics, 22(01), 35-46.
Oke, A E, Aliu, J O, Tamunosa Ojurongbe, E, Aigbavboa, C O, Aghimien, D O and Ebekozien, A (2026) Investigation of Core and Future Competencies Needed for Quantity Surveyors in Nigeria. International Journal of Construction Education and Research, 22(01), 119–37.
Okoye, P U, Okolie, K C and Odesola, I A (2022) Risks of implementing sustainable construction practices in the Nigerian building industry. Construction Economics and Building, 22(01), 21-46.
Okpala, I, Nnaji, C and Awolusi, I (2022) Wearable sensing devices acceptance behavior in construction safety and health: assessing existing models and developing a hybrid conceptual model. Construction Innovation, 22(01), 57-75.
Osei-Kyei, R and Chan, A P C (2017) Factors attracting private sector investments in public–private partnerships in developing countries: A survey of international experts. Journal of Financial Management of Property and Construction, 22(01), 92-111.
Oyewobi, L O, Windapo, A O and Rotimi, J O B (2017) Determinants of construction organisational performance: A partial least square-path analytic method. Journal of Financial Management of Property and Construction, 22(01), 37-61.
Ozcan-Deniz, G (2022) Construction management education in cyberspace: A critical review and analysis. International Journal of Construction Management, 22(01), 8-18.
P, S, Nagarajan, P and Shashikala, A P (2024) Fracture properties of GGBS-dolomite geopolymer concrete. Journal of Engineering, Design and Technology, 22(01), 120-9.
Pan, Z (2004) Commercial housing ownership predictors in urban China: an analysis of a national survey. Construction Management and Economics, 22(01), 85-91.
Pandimani, M R, Ponnada, M R and Geddada, Y (2024) Finite-element modeling of partially prestressed concrete beams with unbonded tendon under monotonic loadings. Journal of Engineering, Design and Technology, 22(01), 235-56.
Poirier, E, Staub-French, S, Pilon, A, Fallahi, A, Teshnizi, Z, Tannert, T and Froese, T (2022) Design process innovation on brock commons tallwood house. Construction Innovation, 22(01), 23-40.
Pries, F, Dorée, A G, Veen, B V d and Vrijhoef, R (2004) Note: The role of leaders' paradigm in construction industry change. Construction Management and Economics, 22(01), 7-10.
Proctor-Parker, C and Stopforth, R (2024) Radio frequency identification (RFID) stock control and geo-location data system from a moving vehicle. Journal of Engineering, Design and Technology, 22(01), 159-81.
Quaigrain, R A, Owusu-Manu, D, Edwards, D J and Danquah, D (2026) Investigating the relationship between organizational mindset orientation and project performance of large organizations in the Ghanaian construction industry. International Journal of Construction Education and Research, 22(01), 2–26.
Rostami, A, Sommerville, J, Wong, I L and Lee, C (2015) Risk management implementation in small and medium enterprises in the UK construction industry. Engineering, Construction and Architectural Management, 22(01), 91-107.
Saka, N, Saka, A B, Akinradewo, O and Aigbavboa, C O (2024) Impact assessment of political administrations on the performance of the construction sector: a time series analysis. Journal of Engineering, Design and Technology, 22(01), 1-21.
Sands, K S and Suh, M J (2026) Roofers’ Perceptions on Topics of Heat Safety. International Journal of Construction Education and Research, 22(01), 53–71.
Seyed-Alangi, F, Parchami-Jalal, M and Noorzai, E (2026) The Challenges of Risk and Reward Sharing in the Implementation of Integrated Project Delivery Contracts in the Iranian Construction Industry. International Journal of Construction Education and Research, 22(01), 72–95.
Sharma, V C and Gupta, J K (2026) Artificial Intelligence in Construction: Multi-Stakeholder Strategies for Future Development. International Journal of Construction Education and Research, 22(01), 164–88.
Skitmore, R M (2004) Predicting the probability of winning sealed bid auctions: the effects of outliers on bidding models. Construction Management and Economics, 22(01), 101-9.
Sohail, M and Baldwin, A N (2004) Performance indicators for 'micro-projects' in developing countries. Construction Management and Economics, 22(01), 11-23.
Somani, N, Tyagi, Y K and Gupta, N K (2024) An investigation on the influence of sintering temperature on microstructural, physical and mechanical properties of Cu-SiC composites. Journal of Engineering, Design and Technology, 22(01), 77-88.
Staub-French, S, Pilon, A, Poirier, E, Fallahi, A, Kasbar, M, Calderon, F, Teshnizi, Z and Froese, T (2022) Construction process innovation on Brock Commons Tallwood House. Construction Innovation, 22(01), 1-22.
Thavi, R, Jhaveri, R, Narwane, V, Gardas, B and Jafari Navimipour, N (2024) Role of cloud computing technology in the education sector. Journal of Engineering, Design and Technology, 22(01), 182-213.
Turner, J R (2004) Farsighted project contract management: incomplete in its entirety. Construction Management and Economics, 22(01), 75-83.
Wong, J K W, Oladinrin, O T, Ho, C M F, Guilbert, E and Kam, R (2022) Assessment of video-based e-learning in a construction measurement course. International Journal of Construction Management, 22(01), 1-7.
Yap, J B H, Hew, Q L T and Skitmore, M (2022) Student learning experiences in higher education: Investigating a quantity surveying programme in Malaysia. Construction Economics and Building, 22(01), 1-20.
Yung, P and Rafferty, K (2015) Statutory adjudication in Western Australia: Adjudicators’ views. Engineering, Construction and Architectural Management, 22(01), 54-72.